Mechanical & Electrical Installation
2
2.10 Installation Methods
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 67
2.10 Installation Methods
The drive installation methods include standard installation and external heatsink installation.
◆ Standard Installation
Refer to
Drive Exterior and Mounting Dimensions on page 439 for more information about external dimensions
and installation methods.
◆ External Heatsink
Refer to
Table 2.9 and Table 2.10 for the panel cut-out dimensions for external heatsink installations. Drive
models smaller than 2075 and 4045 must use an attachment for panel-through mounting.
Note:
• The exterior mounting dimensions and installation dimensions for a standard installation are different than the dimensions for an
external heatsink installation.
• The shaded parts of the panel cut-out dimensions are the gasket dimensions. Make sure that the gasket is not smaller than the specified
dimension.
To Next Page
Loading...
