YASKAWA CR700 - Field Bus Network Support

Network Communications
5
5.2 Field Bus Network Support
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 301
5.2 Field Bus Network Support
The user can control and monitor the drive through the network from the PLC. This product comes standard with
a RS-485 interface (MEMOBUS/Modbus communications). If a separately sold communication option is
mounted to the drive, it will enable the drive to support various other network communications.
◆ Standard Internal Communication Interfaces
The following communication interfaces are built into this product as standard.
• MEMOBUS/Modbus(RS-485)
◆ Communication Option
The following table lists the field bus networks compatible with this product. Contact Yaskawa or your nearest
sales representative to place a communication option order.
Type of Communications Option Model
CC-Link SI-C3
MECHATROLINK-II SI-T3
MECHATROLINK-III SI-ET3
PROFIBUS-DP SI-P3
CANopen SI-S3
Type of Communications Option Model
DeviceNet SI-N3
Modbus TCP/IP SI-EM3
PROFINET SI-EP3
EtherNet/IP SI-EN3