YASKAWA CR700

Specifications
9
9.2 Model Specifications (200 V Class)
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 429
9.2 Model Specifications (200 V Class)
Table 9.1 Rating (200 V Class)
Model 2003 2005 2008 2011 2014 2018 2025 2033 2047 2060 2075
Maximum Applicable Motor Output
*1
(kW)
0.55 0.75 1.5 2.2 3 4.0 5.5 7.5 11 15 18.5
Input
Rated
Input
Current
*2
(A)
AC 3.6 4.8 8.9 12.7 17 20.7 30 40.3 58.2 78.4 96
DC 4.5 5.9 11 16 21 25 37 49 71 96 118
Output
Rated Output Capacity
*3
(kVA)
1.2 1.9 3.0 4.2 5.3 6.7 9.5 12.6 17.9 22.9 28.6
Rated Output Current
(A)
3.2 5 8 11 14 17.5 25 33 47 60 75
Overload Tolerance
150% of the rated output current for 60 s
Note:
Derating can be necessary for applications that start and stop frequently.
Carrier Frequency
8 kHz without derating the drive capacity.
Derate the drive capacity to use values to 15 kHz maximum.
Maximum Output
Voltage
Three-phase 200 V to 240 V
Note:
The maximum output voltage is proportional to the input voltage.
Maximum Output
Frequency
• AOLV (Advanced Open Loop Vector): 120 Hz
• CL-V/f (Closed Loop V/f Control), CLV (Closed Loop Vector): 400 Hz
• V/f (V/f Control), OLV (Open Loop Vector): 590 Hz
Measures
for
Harmonics
DC reactor External options
Braking
Device
Braking Transistor Standard internal characteristics
EMC
Filter
EMC Filter
IEC61800-3, C3
Factory option
• Models 2xxxB: There is a category C3 EMC filter in the drive.
Power
Supply
Rated Voltage/Rated
Frequency
• Three-phase AC power supply 200 V to 240 Vat 50/60 Hz
• DC power supply 270 V to 340 V
Permitted Voltage
Fluctuation
-15% to +10%
Permitted Frequency
Fluctuation
±5%
Input Power
*4
(kVA) 1.5 2.0 3.7 5.3 7.1 8.6 12.5 16.8 24.2 32.6 39.9
*1 The maximum applicable motor output complies with 208 V motor ratings as specified in NEC Table 430.250. The rated output
current of the drive output amps must be equal to or more than the motor rated current.
*2 Assumes the value at the rated output current. The input current rating changes when the power supply transformer, input reactor,
wiring connections, or power supply impedance change.
*3 The rated output capacity is calculated with a rated output voltage of 208 V.
*4 The power supply capacity is calculated with the voltage between lines at 240 V.
Table 9.2 Rating (200 V Class)
Model 2088 2115 2145 2180 2215 2283 2346 2415
Maximum Applicable Motor Output
*1
(kW) 22 30 37 45 55 75 90 110
Input
Rated Input
Current
*2
(A)
AC 82 111 136 164 200 271 324 394
DC 101 136 167 202 245 332 397 483