Parameter List
10
10.7 d: Reference Settings
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 479
10.7 d: Reference Settings
◆ d1: Frequency Reference
No.
(Hex.)
Name Description
Default
(Range)
Ref.
d1-01
(0280)
RUN
Reference 1
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
624
d1-02
(0281)
RUN
Reference 2
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
624
d1-03
(0282)
RUN
Reference 3
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
625
d1-04
(0283)
RUN
Reference 4
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
625
d1-05
(0284)
RUN
Reference 5
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
625
d1-06
(0285)
RUN
Reference 6
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
625
d1-07
(0286)
RUN
Reference 7
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
625
d1-08
(0287)
RUN
Reference 8
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
0.00 Hz
(0.00 - 590.00 Hz)
626
d1-09
(0288)
RUN
Reference 9
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
626
d1-10
(028B)
RUN
Reference 10
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
626
d1-11
(028C)
RUN
Reference 11
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
626
d1-12
(028D)
RUN
Reference 12
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
626
d1-13
(028E)
RUN
Reference 13
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
627
d1-14
(028F)
RUN
Reference 14
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
627
d1-15
(0290)
RUN
Reference 15
Sets the frequency reference in the units from o1-03 [Frequency Display Unit Selection.
Note:
On drives with software versions PRG: 01021 and later, this function is enabled.
0.00 Hz
(0.00 - 590.00 Hz)
627
To Next Page
Loading...
