Receiving
1
1.2 Crane Application Instructions
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 21
1.2 Crane Application Instructions
For hoist applications, wire the drive so that the Forward Run command hoists the load, and the Reverse Run
command lowers the load. If the machine does not move this way, crane software functions and performance will
be reversed, making it impossible to take full advantage of the drive performance and capabilities.
If the direction of motor rotation is not consistent with machinery, do all these procedures to correct the direction
of motor rotation.
• Change two phases of the main circuit cables connecting the motor and drive.
• In Closed Loop Vector Control, change the setting of F1-05 [Encoder 1 Rotation Selection].
To Next Page
Loading...
Need help?
General