2.9 Change the Drive Enclosure Type
54 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
1. Use the included screws to install the UL Type 1 base to the drive.
Tighten the screws to a correct tightening torque:
• 3.92 N∙m to 4.90 N∙m (34.70 lbf∙in to 43.37 lbf∙in)
A - M6 × 14 pan head screws
Figure 2.39 Safety the Base
2. Use the included screws to install the UL Type 1 conduit bracket to the base.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - Conduit bracket B - M4 × 10 pan head screws
Figure 2.40 Install the Conduit Bracket
3. Use the included screws to install the front cover to the base.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - Front cover B - M4 × 10 truss head screws
Figure 2.41 Install the Front Cover
To Next Page
Loading...
