YASKAWA CR700

Parameter Details
11
11.2 A: Initialization Parameters
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 583
The drive saves these parameters to A2-01 to A2-32.
• The drive saves a maximum of 32 parameters.
Note:
Set A1-01 = 2 [Advanced Level] or A1-01 = 3 [Expert Level] to register the necessary parameters.
• The drive automatically saves changed parameters to A2-17 to A2-32.
Note:
Set A2-33 = 1 [User Parameter Auto Selection = Enabled: Auto Save Recent Parms].
■ A2-33: User Parameter Auto Selection
No.
(Hex.)
Name Description
Default
(Range)
A2-33
(0126)
User Parameter Auto
Selection
Sets the automatic save feature for changes to parameters A2-17 to A2-32 [User Parameters 17 to
32].
1
(0, 1)
0 : Disabled: Manual Entry Required
Set User Parameters manually.
1 : Enabled: Auto Save Recent Parms
The drive automatically registers any parameters that are changed to A2-17 to A2-32. The drive automatically
saves the most recently changed parameter to A2-17, and saves a maximum of 16 parameters. Once 16 parameters
have been registered, the drive will start to remove old parameters from the User Parameter list.
Registered parameters can be shown in [User Custom Parameters] under the main menu.
Note:
In General-Purpose Setup Mode, the drive registers parameters starting from A2-27 since parameters up to A2-26 are already registered
by default.
V/f
CL-V/f
OLV
CLV
AOLV