YASKAWA CR700

Mechanical & Electrical Installation
2
2.9 Change the Drive Enclosure Type
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 65
A - Stay brackets B - M5 × 14 pan head screws
Figure 2.65 Install the Stay Brackets
2. Use the included screws to install the UL Type 1 base on the stay brackets.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - M4 × 14 pan head screws B - Base
Figure 2.66 Install the Base on the Stay Brackets
3. Use the included screws to install the UL Type 1 base to the drive.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
A - M4 × 10 pan head screws
Figure 2.67 Safety the Base