YASKAWA CR700

11.11 o: Keypad-Related Settings
784 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
■ o1-10: User Units Maximum Value
No.
(Hex.)
Name Description
Default
(Range)
o1-10
(0520)
User Units Maximum Value
Sets the value that the drive shows as the maximum output frequency.
Determined by o1-03
(1 - 60000)
To display a maximum output frequency of 100.00, set parameters to these values:
• o1-10 = 10000
• o1-11 = 2 [User Units Decimal Position = Two Decimal Places (XXX.XX)]
Note:
Set o1-03 = 3 [Frequency Display Unit Selection = User Units (o1-10 & o1-11)] before you set o1-10 and o1-11.
■ o1-11: User Units Decimal Position
No.
(Hex.)
Name Description
Default
(Range)
o1-11
(0521)
User Units Decimal
Position
Sets the number of decimal places for frequency reference and monitor values.
Determined by o1-03
(0 - 3)
0 : No Decimal Places (XXXXX)
1 : One Decimal Places (XXXX.X)
2 : Two Decimal Places (XXX.XX)
3 : Three Decimal Places (XX.XXX)
Note:
Set o1-03 = 3 [Frequency Display Unit Selection = User Units (o1-10 & o1-11)] before you set o1-10 [User Units Maximum Value] and
o1-11.
■ o1-20: Sheave Diameter
No.
(Hex.)
Name Description
Default
(Range)
o1-20
(0575)
Sheave Diameter
Sets the sheave diameter.
400 mm
(100 - 2000 mm)
■ o1-21: Roping Ratio
No.
(Hex.)
Name Description
Default
(Range)
o1-21
(0576)
Roping Ratio
Sets the roping ratio.
2
(1 - 4)
1 : 1:1
2 : 1:2
3 : 1:3
4 : 1:4
■ o1-22: Gear Ratio
No.
(Hex.)
Name Description
Default
(Range)
o1-22
(0577)
Gear Ratio
Sets the gear ratio.
14.00
(0.10 - 50.00)
■ o1-24 to o1-35: Custom Monitor 1 to 12
No.
(Hex.)
Name Description
Default
(Range)
o1-24 to o1-35:
(11AD - 11B8)
RUN
Custom Monitor 1 to 12
Sets a maximum of 12 monitors as user monitors. This parameter is only available when using an
LCD keypad.
o1-24: 101
o1-25: 102
o1-26: 103
o1-27 to o1-35: 0
(0, 101 - 999)
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV
V/f
CL-V/f
OLV
CLV
AOLV