YASKAWA CR700 - Page 827

EZZ023534<1>
13 / 21
Figure 3.7 Settings when S9-14 = 1 or 2 [Wire Length Detection Method = External Input]
Cargo
Encoder cable
Motor cable
Motor cable
Encoder cable
Motor cable
Encoder cable
Length calculated using
external input value
[Wire Length@Rolling Up]
[Wire Length]
Change in center of gravity position of wire tip due to suspended cargo
Corrected by S9-28 to 30 [Correction value1 to 3 of Wire Length]
At hoisting Limit
(At forward travel
limit activation)
At lowering limit
(At reverse travel
limit activation)