YASKAWA CR700

EZZ023535
21 / 35
 SA-65 Trigger Sw Type
No.
(Hex.)
Name Description
Default Setting
(Range)
SA-65
(1AD6)
Trigger Sw
Type
Selects N.O. and/or N.C. for the inputs of the Master
and Slave Trigger switches.
0
(0 - 3)
0: Both NO
1: Master NO Slave NC
2: Master NC Slave NO
3: Both NC
SA-62
Align Trim Rate
(
SA-62
)
SA-62
Align Trim Rate
(
SA-62
)
Master run input
Slave run input
Alignment input
Master Trigger input
Slave Trigger input
Master motor speed
Slave motor speed
Align complete output
In Alignment output
Master run input
Slave run input
Alignment input
Master Trigger input
Slave Trigger input
Master motor speed
Slave motor speed
Align complete output
In Alignment output
Figure 3.14 N.O. Trigger Input (SA-65 = 0)
Figure 3.15 NC Trigger Input (SA-65 = 3)