8.15 Numeric Key Customize Function
8-87
8.15 Numeric Key Customize Function
8.15.1 What is the Numeric Key Customize Function?
With this function, the user can set the function of an application that has been allocated to the
numeric keys of the programming pendant to the other function.
Since any frequently used operation can be allocated to the numeric keys on the program-
ming pendant, decreased key operations reduce the teaching time.
8.15.2 Allocatable Functions
There are two allocation methods as follows:
• Key Allocation (EACH)
• Key Allocation (SIM)
Key Allocation (EACH)
With key allocation (EACH), the manipulator operates according to the allocated function
when the numeric key is pressed. The allocatable functions are listed below.
The Numeric Key Customize Function is allowed to set only when the security mode is in
the management mode.
Function Description
Manufacturer
allocation
Allocated by Yaskawa. Allocating another function invalidates the func-
tion allocated by the manufacturer.
Instruction allocation Allocates any instructions assigned by the user.
Job call allocation Allocates job call instructions (CALL instructions). The jobs to be called
are only those registered in the reserved job names. (Specified by the
registration No.)
Display allocation Allocates any displays assigned by the user.
NOTE
To Next Page
Loading...
Need help?
General
