YASKAWA NX100 Instructions

8.18 File Initialize
8-107
8.18.4 Initializing I/O Data
Operation Explanation
1 Turn ON the power supply
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
the management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}.
5 Select {I/O DATA}. The I/O data selection window appears.
6 Select data to be initialized. The selected data is marked with ““.
The I/O data marked with "
" cannot be selected.
7 Press [ENTER]. A confirmation dialog box appears.
8 Select {YES}. The selected data is initialized.
Short CutMain Menu Maintenance mode
INITIALIZE
C.IO PRGM
IO
NAME DATA
SIMULATED
IN DATA
EXTERNAL
IO NAME DATA
REGISTER
NAME DATA
CIOPRG
IONAME
PSEUDOIN
EXIONAME
IOMNAME
.
LST
.
DAT
.
DAT
. DAT
. DAT
INITIALIZE
C.IO PRGM
IO
NAME DATA
SIMULATED
IN DATA
EXTERNAL
IO NAME DATA
REGISTER
NAME DATA
CIOPRG
IONAME
PSEUDOIN
EXIONAME
IOMNAME
.
LST
.
DAT
.
DAT
. DAT
. DAT
Short CutMain Menu Maintenance mode
INITIALIZE
C.IO PRGM
IO
NAME DATA
SIMULATED
IN DATA
EXTERNAL
IO NAME DATA
REGISTER
NAME DATA
CIOPRG
IONAME
PSEUDOIN
EXIONAME
IOMNAME
.
LST
.
DAT
.
DAT
. DAT
. DAT
Initialize?
NO
YES

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C