YASKAWA NX100 Instructions

1.6 Notes for Moving and Transferring the MOTOMAN
1-14
1.6 Notes for Moving and Transferring the MOTOMAN
When moving or transferring the Motoman, observe the following safety precautions:
• Attach the instructions to the controller cabinet so that all users have
access to necessary manuals. See Section 1.3 for a complete list of
manuals.
If any manuals are missing, contact your Yaskawa representative.
• If the warning labels on the manipulator and NX100 are illegible, clean
the labels so that they can be read clearly. Note that some local laws
may prohibit equipment operation if safety labels are not in place.
Contact your YASKAWA representative if you require new warning labels.
• When the MOTOMAN is transferred, it is recommended to check with
Yaskawa Engineering Co. which is listed on back cover of this manual.
Incorrect installation or wiring may result in personal injury and property damage.
• Never modify the manipulator or NX100.
Failure to observe this precaution could result in injury or damage resulting from fire,
power failure, or operation error.
CAUTION
PROHIBITED

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C