YASKAWA NX100 Instructions

1.2 Special Training
1-3
1.2 Special Training
1.3 Motoman Manual List
• Persons who teach or inspect the manipulator must undergo required
training before using the manipulator.
• For more information on training, inquire at the nearest YASKAWA
branch office.
The telephone numbers are listed on the back cover of this manual.
• It is important to have and be familiar with all manuals concerning the
MOTOMAN.
You should have the four manuals listed below:
-MOTOMAN- INSTRUCTIONS
-NX100 INSTRUCTIONS
-NX100 OPERATOR’S MANUAL
Confirm that you have all these manuals on hand.
If any manuals are missing, contact your salesman from YASKAWA’s local branch office.
The relevant telephone numbers are listed on the back cover.
MANDATORY
MANDATORY

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C