YASKAWA NX100 - Initialize Job File

8.18 File Initialize
8-104
8.18 File Initialize
8.18.1 Initialize Job File
Operation Explanation
1 Turn ON the power supply
again while pressing [MAIN
MENU] simultaneously.
2 Change the security mode to
the management mode.
3 Select {FILE} under the main
menu.
4 Select {INITIALIZE}. The INITIALIZE window appears.
5 Select {JOB}. A confirmation dialog box appears.
6 Select {YES}. The job data is initialized.
Short CutMain Menu Maintenance mode
INITIALIZE
JOB
FILE/GENERAL DATA
PARAMETER
I/O DATA
SYSTEM DATA
Short CutMain Menu Maintenance mode
INITIALIZE
JOB
FILE/GENERAL DATA
PARAMETER
I/O DATA
SYSTEM DATA
Initialize?
NO
YES