YASKAWA NX100 Instructions

8.15 Numeric Key Customize Function
8-92
 Job Call Allocation
Set this function in the KEY ALLOCATION (EACH) window.
Operation Explanation
1 Move the cursor to the “FUNC-
TION” of the key to be allo-
cated and press [SELECT].
A selection list appears.
2 Select “JOB CALL”. The reserved job registration No. is shown in the “ALLOCATION
CONTENT” (reserved job registration No.: 1 to 10).
To change the reserved job registration No., move the cursor to
the No. and press [SELECT]. Numeric values can now be
entered. Input the number to be changed, and press [ENTER].
Short CutMain Menu
KEY ALLOCATION(EACH)
DATA EDIT DISPLAY UTILITY
APPLI. NO. : 1
0
1
2
3
4
5
6
7
8
9
.
KEY FUNCTION ALLOCATION CONTENT
INSTRUCTION
JOB CALL
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
MAKER
WAIT
1
PAGE

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C