YASKAWA NX100 Instructions

8.12 Instruction Level Setting
8-83
8.12.3 Setting the Learning Function
The learning function is set at "VALID" by default.
Operation Explanation
1 Select {SETUP} under the
main menu.
2 Select {TEACHIG COND}. The TEACHING CONDITION window appears.
3 Select "INSTRUCTION INPUT
LEARNING".
“VALID” and “INVALID” are displayed alternately every time
[SELECT] is pressed.
Short CutMain Menu
TEACHING CONDITION
DATA EDIT DISPLAY UTILITY
RECT/ CYLINDRICAL
LANGUAGE LEVEL
INSTRUCTION INPUT LEARNING
MOVE INSTRUCTION SET
STEP ONLY CHANGING
RECT
SUBSET
VALID
STEP
PROHIBIT
Turn on servo power
Short CutMain Menu
TEACHING CONDITION
DATA EDIT DISPLAY UTILITY
RECT/ CYLINDRICAL
LANGUAGE LEVEL
INSTRUCTION INPUT LEARNING
MOVE INSTRUCTION SET
STEP ONLY CHANGING
Turn on servo power
RECT
STANDARD
INVALID
STEP
PROHIBIT

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C