YASKAWA NX100 Instructions

13.3 CPU Unit
13-25
 External Servo ON
This signal is used to connect the servo ON switch of an external operation device.
If the signal is input, the servo power supply is turned ON.
Connection for External Servo ON
-29
-30
+24V2
EXSVON
Robot system input
terminal block
MXT
External servo ON
NX100
JANCD-
NBB01
JANCD-
NIF01-

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C