YASKAWA NX100 Instructions

9.3 Automatic Backup Function
9-20
9.3.4 Error List
 Error Contents
Error No. Data Message Cause
0770 *
During robot or station opera-
tion
The automatic backup would not work when
the robot or a station is in motion.
3390 File not found The file to be loaded no longer exists.
3460
*
Cannot backup Compact-
Flash
1 Insufficient capacity of the CompactFlash
2 Cannot access the CompactFlash
3501 *
Check CompactFlash inser-
tion
Cannot access the CompactFlash
3550 *
Under automatic backup
operation. Operate after the
backup is completed.
The automatic backup window cannot be
called to display while the automatic backup
is being processed.
3551 *
Under automatic backup
operation. Operate "SORT
FILE" after the backup is
completed.
The sort file cannot be operated during the
automatic backup operation.
3560 *
Failed in sorting backup file Failed to sort the backup file for another rea-
son than the access to CompactFlash.
3580 *
Under backup file access.
Operate after the access is
completed.
To display another window and then display
the automatic backup window again after
"SORT FILE" operation, “SORT FILE” pro-
cess should be completely finished.
3581 *
Under backup file access.
Operate "SORT FILE" after
the access is completed.
The previous "SORT FILE" process should
be completely finished to perform the next
"SORT FILE" operation.

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C