YASKAWA NX100 - Press [ENTER]

7.1 Protection Through Security Mode Settings
7-7
4 Input the user ID. The user ID input window appears.
5 Press [ENTER]. The input user ID is compared with the user ID of the selected
security mode. When the correct user ID is entered, the security
mode is changed.
Operation Explanation
Main Menu Short Cut
JOB
DOUT
MOVE
END
IN/OUT
In Out
SYSTEM INFO
ARC WELDING
VARIABLE
B001
ROBOT
CF
FD/CF
Input current ID no. (4 to 8 digits)
SECURITY
MODE
T
DATA
EDIT
DISPLAY
UTILITY
DISPLAY SETUP
Aa
Password=
The following user ID numbers are set by default.
• Editing Mode: [0]
• Management Mode: [99999999]
SUPPLE
-MENT