YASKAWA NX100 Instructions

1.4 Personnel Safety
1-5
• Never forcibly move the manipulator axes.
Failure to observe this caution may result in injury or equipment damage.
• Never lean on NX100 or other controllers, and avoid inadvertently push-
ing buttons.
Failure to observe this caution may result in injury or damage by unexpected movement
of the manipulator.
• Never allow unauthorized personnel to touch the NX100 during opera-
tion.
Failure to observe this caution may result in injury or damage resulting from unexpected
movement of the manipulator.
CAUTION
ON
RESET
ON
RESET

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C