Zte ZXR10 GER - Multicast Address; IGMP; Multicast Usage; Multicast Group Members

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
308 Confidential and Proprietary Information of ZTE CORPORATION
PE1(config-router)#network 1.1.1.1 0.0.0.0 area 0.0.0.0
PE1(config-router)#network 175.1.1.0 0.0.0.255 area
0.0.0.0
P configuration:
P(config)#interface loopback10
P(config-if)#ip address 1.1.1.2 255.255.255.255
P(config)#interface fei_2/1
P(config-if)#ip address 175.1.1.2 255.255.255.0
P(config-if)#mpls ip
P(config)#interface fei_2/2
P(config-if)#ip address 148.1.1.2 255.255.255.0
P(config-if)#mpls ip
P(config)#mpls ip
P(config)#mpls ldp router-id loopback10 force
P(config)#router ospf 1
P(config-router)#network 1.1.1.2 0.0.0.0 area 0.0.0.0
P(config-router)#network 148.1.1.0 0.0.0.255 area 0.0.0.0
P(config-router)#network 175.1.1.0 0.0.0.255 area 0.0.0.0
PE2 configuration:
PE2(config)#interface loopback10
PE2(config-if)#ip address 1.1.1.3 255.255.255.255
PE2(config)#interface fei_3/1
PE2(config-if)#ip address 148.1.1.3 255.255.255.0
PE2(config-if)#mpls ip
PE2(config)#interface fei_3/2
PE2(config-if)#mpls xconnect 1.1.1.1 100
PE2(config)#mpls ip
PE2(config)#mpls ldp router-id loopback10 force
PE2(config)#mpls ldp target-session 1.1.1.1
PE2(config)#router ospf 1
PE2(config-router)#network 1.1.1.3 0.0.0.0 area 0.0.0.0
PE2(config-router)#network 148.1.1.0 0.0.0.255 area
0.0.0.0
VPWS Maintenance and Diagnosis
This procedure describes how to do VPWS configuration on ZTE
ZXR10 GER.
Router Command Line Interface has been accessed.
Purpose
Prerequisite