Zte ZXR10 GER - Command Mode; Show Ip Pimsm Neighbor

Chapter 24 Multicast Routing Configuration
Confidential and Proprietary Information of ZTE CORPORATION 355
ZXR10#show ip pimsm neighbor
Neighbor Address Interface DR Prio
Uptime Expires
131.1.1.91 pos3
_
5/1 30000
00:19:34 00:01:29
22.22.22.
4
3 tunnel22 1
03:21:25 00:01:16
4. To show the BSR information, use show ip pim bsr
command in Priviliged mode as shown in
Table 421.
TABLE 421 SHOW IP PIM BSR COMMAND
Command Format
Command Mode Command
Function
show ip pimsm
neighbor
[<interface-
name>]
Priviliged
This shows the BSR
information
Result: This shows the BSR information.
ZXR10#show ip pim bsr
PIMSM Bootstrap information
BSR address: 131.1.1.45(?)---
Uptime: 00:01:06, BSR Priority :200, Hash mask
length:30
Expires:00:00:55
This system is a candidate BSR
candidate BSR address: 131.1.1.45, priority:
200, hash mask length:30
This System is Candidate_RP:
candidate RP address:
55.1.1.45(fei_3/1),priority:100, Group acl:1
candidate RP address:
43.43.43.43(static),priority:0
5. To show the RP set information advertised by the BSR, use
show ip pim rp mapping command in Priviliged mode as
shown in
Table 422.
TABLE 422 SHOW IP PIM RP MAPPING COMMAND
Command
Format
Command
Mode
Command Function
show ip
pim rp
mapping
Priviliged This shows the RP set
information advertised by the
BSR
Result: This shows the RP set information advertised by the
BSR.