Chapter 22 VPLS Configuration
Confidential and Proprietary Information of ZTE CORPORATION 317
VPLS Diagnosis and Maintenance
This procedure describes how to diagnose and maintain the VPLS
configuration on ZTE ZXR10 GER.
Router Command Line Interface has been accessed.
1. To show the relevant configuration of VPLS, use show vfi
command in privilged mode, as shown in
Table 362.
TABLE 362 SHOW VFI COMMAND
Command
Format
Command
Mode
Command Function
show mpls
l2transport
vc
Privilged
This shows the relevant
configuration of VPLS
Result: This shows the relevant configuration of VPLS.
2. To show the successfully established PW, use show mpls
l2transport vc vpls command in privilged mode, as shown
in
Table 363.
TABLE 363 SHOW MPLS L2TRANSPORT VC VPLS COMMAND
Command
Format
Command
Mode
Command Function
show mpls
l2transport
vc vpls
Privilged
This show the successfully
established PW
Result: This show the successfully established PW.
3. To view the MAC forwarding table of VPLS instances, use
show mac-table vfi command in privilged mode, as shown
in
Table 364.
TABLE 364 SHOW MAC TABLE VFI COMMAND
Command
Format
Command
Mode
Command Function
show
mac-table
vfi
Privilged
This shows the MAC forwarding
table of VPLS instances
Result: This shows the MAC forwarding table of VPLS
instances.
4. Open the VPLS debug information. Following command is
used. debug mpls ldp l2vpn.
E
ND OF STEPS
Purpose
Prerequisite
Steps
To Next Page
Loading...
