Zte ZXR10 GER - Figure 40 Expression Cli Window; Figure 41 Enabled Mode Cli Window

Chapter 4 Usage and Operations
Confidential and Proprietary Information of ZTE CORPORATION 51
 Result: a > sign appears.
FIGURE 40 EXPRESSION CLI WINDOW
3. Write enable command, if there is password to access the
router privileged mode, then write password as shown in
Figure 41.
Result: a # sign appears that shows enabled mode or
privileged mode.
FIGURE 41 ENABLED MODE CLI WINDOW
4. To prevent an unauthorized access to router in Telnet mode,
user name and password for Telnet access must be
configured on router. To log on to router, the configured user
name and password must be input. Use the following
command to configure the user name and password for
remote login as shown in
Table 51.
TABLE 51 USERNAME COMMAND
Command
Format
Command Mode
Command Function
username Global
Configures user name and