EasyManua.ls Logo

Zte ZXR10 GER - Figure 48 Tftp Server Selection Window

Zte ZXR10 GER
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
68 Confidential and Proprietary Information of ZTE CORPORATION
Router Command Line Interface has been accessed.
In these steps, Solarwinds TFTP is used for TFTP software part, a
free TFTP server software program, which is installed on
Microsoft Windows XP (SP2).
Note: In these steps, CLI configuration of router occurs through
Hyper Terminal emulation software, present in Windows
Operating System.
SolarWinds TFTP is downloaded from
http://www.solarwinds.net/Download-Tools.htm. When
downloading is completed, run SolarWinds-TFTP-Server.exe
from downloaded location.
After installation follow these steps to configure TFTP.
1. Select SolarWinds TFTP server from start menu and then
Click>TFTP Server, as shown in
Figure 48.
FIGURE 48 TFTP SERVER SELECTION WINDOW
Result: A Windows XP Firewall prompt appears that
SolarWinds TFTP wants to run.
Note: This occurs only if Windows XP firewall is enabled. For
other firewall configurations, refer to their documentation.
Important! This is to be in notice that TFTP uses
communication port# 69.
2. Click>Unblock for permanently allowing TFTP server to run
as shown in
Figure 49.
Steps

Table of Contents

Related product manuals