Zte ZXR10 GER - Purpose; Multicast Maintenance and Diagnosis

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
350 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 412 IP MROUTE COMMAND
Command Format
Command
Mode
Command Function
show ip mroute
[group <group-
address>] [source
<source-address>]
[summary]
Global
configuration
This do static multicast
configuration
Result: This do static multicast configuration.
E
ND OF STEPS
Multicast Maintenance and
Diagnosis
Below procedure gives information about multicast maintenance
& diagnosis.
Router CLI (Privileged Mode) has been accessed.
1. To view multicast routing tables, use show ip igmp
interface [<interface-name>] command in Priviliged mode,
as shown in
Table 413.
TABLE 413 SHOW IP MROUTE COMMAND
Command Format
Command
Mode
Command Function
show ip igmp
interface
[<interface-name>]
Priviliged
This shows multicast
routing tables.
Result: This shows multicast routing tables.
2. To view multicast forwarding routing tables, use show ip
forwarding mroute group-address <group-address>
[source-address <source-address>] command in Priviliged
mode as shown in
Table 414.
TABLE 414 SHOW IP MROUTE FORWARDING COMMAND
Command Format
Command Mode Command
Function
show ip forwarding
mroute group-
address <group-
address> [source-
address <source-
address>]
Privileged
This shows
multicast
forwarding routing
tables
Result: This shows multicast forwarding routing tables.
Purpose
Prerequisite
Steps