Abbott CELL-DYN 3000 - Page 502

CELL-DYN 3000 System Operator’s Manual 10-73
9140240E — May 1995
Chapter 10 Troubleshooting
Summary of Table 10.4, Non-Functional Fault Conditions
Condition
Page
Analyzer or Data Station will not power ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-74
No screen display.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-74
The MAIN MENU Screen is not displayed after initialization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-75
The word FAULT on the Analyzer status indicator panel is illuminated in red.. . . . . . . . . . . . . . . . . . . 10-76
Instrument will not stop cycling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-76
Background count is outside acceptable limits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-77
The Data Station keyboards are not operational. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-78
The Sample Loader does not power ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-79
The Sample Loader beeps and the START key is not illuminated. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-79
The System does not communicate with LIS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-79
Search
Go Back
Book TOC