ADCMT 6240B User Manual

6240B DC Voltage Current Source/Monitor Operation Manual
6.7.3 Remote Command List
6-26
Source Suspend voltage SUV  data Suspend voltage setting
Setting range: 0 to 15 V
0
SUV? Response: SUV  d.ddddE d
*1
Suspend Hiz/Loz SUZ0 Hiz: High resistance output status
SUZ1 Loz: Low resistance output status
SUZ? Response: SUZ0 or SUZ1
Pulse base value DBV  data Voltage pulse vase value
0
DBI  data Current pulse base value
0
DBV? Response: DBV  d.ddddE  d
*1
DBI? DBI  d.ddddE  d
Trigger mode M0 AUTO
M1 HOLD
M? Response: M0 or M1
Operate/Standby SBY Sets the output to OFF (Standby)
OPR Sets the output to ON (Operate)
SUS Sets the output to Suspend
SBY?,
OPR?, SUS?
The present output status is returned.
Response:
Remote sensing RS0 2W
RS1 4W
RS? Response: RS0 or RS1
*1: The decimal point position in response varies depending on the setting value.
For the source value, limit value, and time parameter setting ranges, refer to the specifications.
Item Command Description
Default Operation
Power ON
Factory
shipment
DC/pulse
OPR/SUS
Sweep
OPR/SUS
Status SBY?, OPR?, SUS?
Operate OPR
Suspend SUS
Standby SBY

ADCMT 6240B Specifications

General

Brand	ADCMT
Model	6240B
Category	Measuring Instruments
Language	English