6240B DC Voltage Current Source/Monitor Operation Manual
2.2.1 Setting Source Value
2-15
2. Changing the source range
Change the source range by using the DOWN or UP key.
• The range change adjusts to synchronize the source value before and after the change.
• If the set value is below the lowest digit, it is rounded off.
(3 V range)
(15 V range)
UP
Cursor (blinking)
Cursor (blinking)
(3 V range)
(15 V range)
UP
Cursor (blinking)
Cursor (blinking)
To Next Page
Loading...
