Purpose and Scope
Purpose and Scope
The purpose of the FSP 3000R7 Maintenance and Troubleshooting Manual is to provide
information for troubleshooting the FSP3000R7.
This document contains step-by-step procedures and information to identify and resolve
issues and alarms resulting while operating the FSP3000R7.
Audience
This documentation is primarily intended to be read by experienced users, especially for
trained and authorized personnel or service personnel.
It is assumed that personnel responsible for general troubleshooting have the training
required in electronic equipment maintenance.
It assumes that personnel responsible for optical troubleshooting have training in laser-
based technology.
It assumes that personnel have skills in safety information concerning the laser
classification system and the hazard levels of the FSP3000R7.
Note
Please use the Network Element Director (NED) to execute the
procedures in this manual, unless a procedure specifically references the
Craft Interface.
Documentation Revision History
For an overview of the content of any one product release, please refer to the Release
Notes provided with your system.
Product
Release
Document
Number
Document
Issue
Issue Date Description
8.3 80000003740 Issue A February
2009
Update of alarm and event list and updated
according to the content of this release.
Issue B February
2009
Updated according to the content of this
release.
Issue C May 2009 Added and corrected the section in Chapter
1.
16 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A
To Next Page
Loading...