Chapter 14
General Module and Management
Configuration
This chapter provides procedures for general configurations of the FSP 3000R7 modules
and NE management tools.
It contains the following sections:
“Configuring SNMP Settings” on p.570
“Configuring In-band Management” on p.571
“Configuring Loopbacks” on p.575
“Configuring Clock Speeds” on p.578
“Setting Auto Laser Shutdown” on p.579
“Forcing and Releasing Lasers” on p.581
“Checking for Higher-Level NTP Servers” on p.583
“Configuring an OSCM” on p.584
“Configuring OSPF” on p.585
“Tracking a Channel in a Node” on p.586
“Configuring Trace Monitoring” on p.589
“Configuring Wavelengths” on p.593
“Restarting Modules” on p.595
“Exporting Network Element Logs” on p.597
“Configuring Equipment Capabilities” on p.598
FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A 569
To Next Page
