EasyManua.ls Logo

Adva FSP 3000R7 - Handling Equipment; Handling a Shelf

Adva FSP 3000R7
1134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Handling Equipment
Handling Equipment
This section gives guidelines for the correct handling of the FSP3000R7 equipment.
Furthermore, it is described which requirements optical fiber connectors have to be
observed for the use in the optical fiber system.
This section contains the following sub-sections:
Handling a Shelf” on p.47
Handling Modules” on p.48
Handling Pluggable Transceivers on p.49
Handling Fiber-Optic Cables on p.50
Optical Fiber Requirements on p.51
Handling a Shelf
In the following, the term shelf refers to 9HU Shelf, 7HU Shelf or 1HU Shelf.
When handling a shelf, observe the following guidelines:
The shelf contains electrostatic sensitive devices. They can be
damaged or effectively destroyed by electrostatic discharge (ESD)
during unpacking, installation, removal, storage, or shipment. Please
note that discharge might go unnoticed by a technician. Always follow
the ESD-prevention instructions mentioned below! For more details, see
the European Standards EN 100015-1 to 4.
Handle a shelf as an electrostatic discharge sensitive device.
Always wear a properly grounded wrist strap when unpacking and mounting the shelf
or working on the shelf.
Transport or store a shelf (even temporarily) in its original static-protective package
and shipping container.
Do not use brushes with synthetic bristles or acid brushes to clean a shelf.
Do not remove a shelf from its shipping container until you are ready to mount it into a
rack.
Prevent any unauthorized person from having access to preconfigured shelves
containing encryption modules, either classified or not classified to ensure the
integrity of these modudules.
CAUTION
Lifting hazard: Heavy object!
A fully equipped 9HU Shelf or 7HU Shelf is too heavy to be lifted by one
person.
To avoid personal injury and damage to the equipment two persons are needed to lift fully
equipped 7HU Shelf when removing from the shipping container and mounting into a rack.
Do not install a shelf in dusty environments or near equipment with strong
electromagnetic characteristics. In the latter case external interferences could affect
operation.
FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A 47

Table of Contents

Other manuals for Adva FSP 3000R7