Standing Conditions
SGEO-AMP (Amplifier Outage)
The corresponding SNMP name for this standing condition is “ampFailure”.
AIDTYPE Default
Severity
Probable Cause Suggested Corrective
Action
CH NR The amplifier upstream of
the facility has been
shutdown, reducing the
optical power of the facility
below the normal operating
level.
This condition is informative
and no corrective action is
needed.
Table 386: SGEO-AMP (Standing Condition)
970 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A
To Next Page
Loading...