Standing Conditions
SQM-LP (Path LO-Loss of Sequence)
The corresponding SNMP name for this condition is “lossofSequenceLowerOrderPath”.
AIDTYPE Default
Severity
Probable Cause
VC3 CR The path is configured as a member of a virtual concatenation
bundle and the sequence indicator values have been found to
be in error. The most probable causes of this are:
• A difference in the provisioned bundle size, member
paths, or order of member paths between the near and far-
end,
• A difference in the provisioned properties of the GFP
mapping facilities between the near and far-end,
• Impairment of the received signal affecting one or more of
the paths,
• Mis-connection of cross-connected paths used to form the
virtual concatenation bundle at an intermediate cross-
connection point between the near and far-end,
• Equipment failure at the near or far-end.
Table 402: SQM-LP Details and Probable Causes
982 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A
To Next Page
Loading...