Adva FSP 3000R7 - Lkdo-Csf-Opu; Lkdo-Csf-Vf

Standing Conditions
LKDO-CSF-OPU (OPU-Auto Shutdown
(CSF))
The corresponding SNMP name for this condition is “autoShutdownOpuClientSignalFail”.
AIDTYPE Default
Severity
Probable Cause Suggested Corrective Action
CH NR The transmitted signal
has had the client
payload replaced with the
generic Client Signal Fail
(CSF) due to a failure of
the client signal.
This condition is informative and
requires no corrective action.
Corrective action will be taken in
response to the signal failure
condition reported upstream.
Table 233: LKDO-CSF-OPU (Standing Condition)
LKDO-CSF-VF (VF-Auto Shutdown
(CSF))
The corresponding SNMP name for this condition is “autoShutdownVfCSF”.
AIDTYPE Default
Severity
Probable Cause Suggested Corrective Action
CH NR Due to a failure in the
received client signal,
client Signal Fail (CSF)
frames are inserted into the
client payload of the signal
transmitted to the network
interface.
This condition is informative
and requires no corrective
action. Corrective action will be
taken in response to the signal
failure condition reported
locally.
Table 234: LKDO-CSF-VF (Standing Condition)
862 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A