Adva FSP 3000R7 - Alarm and Event Nomenclature

Alarm and Event Nomenclature
Alarm and Event Nomenclature
Each alarm and event in this chapter is identified by two names.
• The first name is the TL1 keyword.
• The second name, specified in parentheses, is the user interface name.
For example, the standing condition “CALC-TOP (Topology Calculation)”:
l CALC-TOP = TL1 keyword
l Topology Calculation = user interface name
Note
The TL1 keyword and user interface name may match. In this case, the
keyword and user interface name are specified in both locations (for
example, RDI (RDI)).
784 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A