Adva FSP 3000R7 - Acp-Aps-Uav; ACP-LINK (APS Channel Link Loss)

Standing Conditions
ACP-APS-UAV (APSChannel
Unavailable)
The corresponding SNMP name for this condition is “acpChannelUnAvail”.
AIDTYPE Default
Severity
Probable Cause Suggested Corrective Action
MOD MN The APSchannel is
already being used. For
example, the
APSchannel could be
used by Client Channel
Card Protection
(CCCP).
Protection switching
will still be performed
but only for one
direction.
1 Change APSchannel to an
unused channel.
2 Change protection mode to
unidirectional.
Table 113: ACP-APS-UAV (Standing Condition)
ACP-LINK (APSChannel Link Loss)
The corresponding SNMP name for this condition is “acpLinkLoss”.
AIDTYPE Default
Severity
Probable Cause Suggested Corrective Action
MOD MN Loss of
communication
with the
provisioned APS
Channel Partner
(ACP).
1 Provision the correct ACP.
2 Install and provision the partner
module. If the ACP was deleted
(indicated by ACP-RMVD (APS
Partner Deleted)), re-provision the
module.
3 Set protection mode to unidirectional.
4 Correct inter-shelf communication
issues.
Table 114: ACP-LINK (Standing Condition)
786 FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A