Viewing Traffic Engineering Information in an NE 555
Manually Restoring a Path 559
Troubleshooting Control Plane Issues 560
Checking Status of TE Links 560
Verifying List of TE Routers 560
Checking Synchronization Status of TE Links 561
Verifying Logical Interfaces 562
Verifying Physical Connections 562
Checking OSPFSettings 563
Verifying All Nodes are Listed 563
Ensuring the Correct Topology 564
Verifying OSPFNeighbors 565
Resolving Connection Failures Resulting from MTU Size Mismatches 566
Tracing a Channel Through the Node 568
General Module and Management Configuration 569
Configuring SNMP Settings 570
Configuring In-band Management 571
In-band Management on Channel Modules 571
In-band Management Configuration Example 571
Example of Configuring the ECC 572
Example of Configuring the NCU 573
Example of Disabling the Far-End LAN IP Interface 574
Example of Verifying Connectivity 574
Configuring Loopbacks 575
Configuring a Client Interface Loopback 576
Configuring a Network Interface Loopback 576
Configuring Clock Speeds 578
Setting Auto Laser Shutdown 579
Forcing and Releasing Lasers 581
Checking for Higher-Level NTP Servers 583
Configuring an OSCM 584
Configuring OSPF 585
Tracking a Channel in a Node 586
Tracking a Channel through a Node 586
Configuring Trace Monitoring 589
Configuring SONET/SDH Traces 589
Configuring OTNTraces 590
Configuring Wavelengths 593
Reconfiguring Wavelengths 593
Restarting Modules 595
Exporting Network Element Logs 597
Configuring Equipment Capabilities 598
Increasing Capability 598
Viewing Capability Level 598
Updating Software, Firmware, and Database 601
About Software and Database Files 602
The Software Package 602
Handling of Files 603
FSP 3000R7 Maintenance and Troubleshooting Manual - Product Release 16.2 - Document Issue A 7
To Next Page
Loading...
