2-16 Chapter 2
System Verification and Performance Tests
Agilent 8753ES System Verification and Performance Tests
In Case of Difficulty
1. If any measured frequency is close to the specification limits, check the time base
accuracy of the counter used.
2. If the analyzer fails by a significant margin at all frequencies (especially if the deviation
increases with frequency), the master time-base probably needs adjustment. In this
case, refer to “Frequency Accuracy Adjustment” on page 3-43. The “Fractional-N
Frequency Range Adjustment” on page 3-40 also affects frequency accuracy.
3. Refer to Chapter 7 , “Source Troubleshooting,” for related troubleshooting information.
To Next Page
Loading...
