Chapter 6 407
Error Messages
Error Message Descriptions
(110) Sync word not found
In a GSM measurement using demodulation, the
training sequence code (sync word) could not be found.
(111) Signal too noisy
In a GSM measurement, indicates that a burst could
not be found in a signal that appears noisy.
(112) Incorrect trigger holdoff - set to 0 sec
(113) SCPI marker query not available in GSM
Rise&Fall
(114) GSM Pwr Meas requires trig delay < −50us.
Delay set to −50us
To Next Page
Loading...
