194 Chapter 4
Basic Digital Operation
User-Defined FSK Modulation
3. Press -600 > Hz.
4. Press
-1.8 > kHz.
This sets the frequency deviation for data 0000, 0001, 0010, and 0011 to configure a user-defined FSK
modulation. Each time you enter a value, the Data column increments to the next binary number, up to a
total of 16 data values (from 0000 to 1111).
For instructions on storing this user-defined FSK modulation to the memory catalog, see “Storing an FSK
Modulation” on page 193.
To Next Page
Loading...
