Agilent Technologies E4438C User Manual

74 Chapter 3
Basic Operation
Using the Instrument State Registers
Deleting Registers and Sequences
These procedures describe how to delete registers and sequences saved to an instrument state register.
Deleting a Specific Register within a Sequence
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Select Seq and enter the sequence number containing the register you want to delete.
4. Press
Select Reg and enter the register number you want to delete.
Notice that the
Delete Seq[n] Reg[nn] should be loaded with the sequence and register you want to delete.
5. Press
Delete Seq[n] Reg[nn].
This deletes the chosen register.
Deleting All Registers within a Sequence
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Select Seq and enter the sequence number containing the registers you want to delete.
4. Press
Delete all Regs in Seq[n].
This deletes all registers in the selected sequence.
Deleting All Sequences
CAUTION Be sure you want to delete the contents of all registers and all sequences in the instrument
state register.
1. Press
Preset.
2. Press the
Recall or Save hardkey.
Notice that the
Select Seq softkey shows the last sequence that you used.
3. Press
Delete All Sequences.
This deletes all of the sequences saved in the instrument state register.

Agilent Technologies E4438C Specifications

General

Brand	Agilent Technologies
Model	E4438C
Category	Portable Generator
Language	English