Agilent Technologies E4438C User Manual

320 Chapter 10
CDMA Digital Modulation
Creating a Custom Multicarrier cdma2000 Waveform
Figure 10-8
Activating a Custom Multicarrier cdma2000 Setup
Using the custom 4-carrier cdma2000 setup from the previous procedure, perform the following task to
activate the custom multicarrier cdma2000 signal.
1. Press
Return > More (2 of 2) > CDMA2000 Off On until On is highlighted.
2. Press
RF On/Off.
Figure 10-9

Agilent Technologies E4438C Specifications

General

Brand	Agilent Technologies
Model	E4438C
Category	Portable Generator
Language	English