Chapter 18 659
Troubleshooting
Returning a Signal Generator to Agilent Technologies
Returning a Signal Generator to Agilent Technologies
To return your signal generator to Agilent Technologies for servicing, follow these steps:
1. Gather as much information as possible regarding the signal generator’s problem.
2. Call the phone number listed on the Internet (http://www.agilent.com/find/assist) that is specific to your
geographic location. If you do not have access to the Internet, contact your Agilent field engineer.
After sharing information regarding the signal generator and its condition, you will receive information
regarding where to ship your signal generator for repair.
3. Ship the signal generator in the original factory packaging materials, if available, or use similar
packaging to properly protect the signal generator.
To Next Page
Loading...
