How to Display and Compare Two Traces 4 Sample Sessions: Analyzing an Existing Trace
E6000C Mini-OTDR User’s Guide, E0302
125
Run another measurement When you press the Run/Stop button to run another
measurement, all zooming and marker settings are
maintained.
How to Display and Compare
Two Traces
Show first trace 1 Make the first trace as normal, either using the RUN/
S
TOP key, or by opening an existing file using <OPEN.>
from the F
ILE menu.
Select empty trace 2 If it is not already open, select [F
ILE] from the popup
menu. A menu appears with two trace names at the
bottom. One of the traces is the one that you have just
selected (the ‘Current trace’). There will be a tick next
to this trace
3 Cursor down to the other trace and press S
ELECT. If you
are currently only displaying one trace, this trace will
be called <empty>.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
