Characteristics CSpecifications
E6000C Mini-OTDR User’s Guide, E0302
209
• Threshold for fiber breaks: 0.1 to 10 dB, selectable in
0.1 dB steps.
• Fiber End Threshold: 0.1 to 20 dB, selectable in 0.1 dB
steps.
Display
• Color or monochrome VGA-LCD: 18.3 cm (7.2”)
• Display points: 640 x 480 points
• Measurement update rate: two measurements per
second in refresh mode.
Interfaces
RS232C
• Maximum baud rate: 115200 bps
• Transmission time at 115200 baud for trace data: 4000
points at approx. 1 second; 16000 points at approx. 4
seconds.
• Centronics: Standard parallel port (SPP).
• Keyboard: PS2 (Min-DIN). For English Standard, PS2,
or AT keyboard.
General
• Automatic setup and analysis
• Instrument settings: storage and recall of user-
selectable instrument settings.
• Laser Safety Class (E6001A-E6005A and E6008B-
E6012A): 21 CFR Class 1, IEC 825 Class 3A
• Recommended recalibration period: 2 years.
For modules only: no calibration on mainframe.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
