E6000C Mini-OTDR User’s Guide, E0302 271
E
E Cleaning Information
The following Cleaning Instructions contain some general
safety precautions, which must be observed during all
phases of cleaning. Consult your specific optical device
manuals or guides for full information on safety matters.
Please try, whenever possible, to use physically
contacting connectors, and dry connections. Clean the
connectors, interfaces, and bushings carefully after use.
Agilent Technologies assume no liability for the
customer’s failure to comply with these requirements.
Cleaning Instructions for this
Instrument
The Cleaning Instructions apply to a number of different
types of Optical Equipment. The following section is
relevant for this instrument.
• “How to clean instruments with a physical contact
interface” on page 291
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
