Agilent Technologies E6000C - Source Mode

Characteristics CSpecifications
E6000C Mini-OTDR User’s Guide, E0302
207
Source Mode
Pulsewidth
You can select any of the following pulsewidths:
• 10 ns, 30 ns, 100 ns, 300 ns, 1
µs, 3 µs, and 10 µs (all
modules). You can also select 5 ns for all multimode
modules, and 20
µs for E6003B, E6008B, and E6012A.
With the E6005A module, you can select a pulsewidth
from 5 ns to 100 ns at 850 nm, and from 5 ns to 10
µs at
1300 nm.
With the E6009A module, you can select a pulsewidth
from 5 ns to 100 ns at 850 nm, and from 5 ns to 1
µs at
1300 nm.
E6001A
E6003A, E6003B,
E6004A, E6008B E6005A, E6009A E6012A
built-in
CW laser
source
built-in CW dual
laser source
built-in CW
dual laser source
built-in CW
dual laser
source
CW output power
-3 dBm -20 dBm (850 nm),
-13 dBm (1300 nm)
-3 dBm
CW stability
(15 min., T=const.)
after 10 minute warm-up
with CW on
±0.1 dB ±0.15 dB ±0.1 dB /
±0.15 dB
Optical output
User-exchangeable Connector Interfaces
Source Mode Modulation
270Hz, 1KHz, and 2KHz squarewave
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com